Buy Tab

Where to Buy   |   Contact Us    

Installation Instructions: Mac OS X (Leopard) with Novatel Wireless Drivers for EVDO modems-3.0.13

Introduction

The following describes how to connect to the Internet using a Novatel Wireless EVDO modem and an Apple® computer running: Macintosh OS X v10.5.1 or greater. It is recommended that you update to the latest version for best performance.

Requirements

Before you can connect to service provider with a Novatel Wireless modem, you will need the following:

  • An active account with a service provider
  • A Novatel Wireless activated EVDO modem
    • PC Card Models - S620, V620, S720, V720
    • ExpressCard34 Models - V640, XS620, XV620, EX720, MX720, V740
    • USB Models - MCD3000, U720, USB720, MC727, U727, USB727, MC760, U760, USB760, CC760, CC777
    • MiFi Model - MiFi2200
  • An Apple®: computer with the appropriate device interface (PC Card, ExpressCard34 or USB)

Setting Up Your Equipment

  1. Power on your Apple®::computer.
  2. Close all open files / applications because you will need to reset your computer to complete the installation.
  3. Download 20418672_Novatel_MacDriverInstaller_v3.0.13-001-PS.zip
  4. Unzip the file and run the installer package - 3G_Drivers_v3.0.13-PS.pkg
    .
  5. Installation Steps

    Picture License

    Package Agreement
    Select Destination, Installation Type

    install succeeded

  6. Insert the modem into the computer.

Setting Up the Network Connections

In this section, you will configure the TCP/IP, PPP, and modem network connection settings.

    1. Make sure the card is completely inserted.
    2. Select System Preferences from the Apple () menu.
      • System Preferences menu
    3. Click the Network button in the System Preferences window.
      • choose network
    4. In the Network window, select Novatel Wireless Device 
      Note: If this is the 1st time the device has been seen, you may have a pop-up window indicating "New Interface detected".

      or if Novatel Wireless device does not exist click '+' to add.
      • Select Interface
    5. Now create a configuration.

 

  1. In the Network window, select Advanced to configure Modem to connect to network.
    • Ensure the Vendor is Novatel and Model is CDMA, then click on OK
  2. Click Apply for the new settings to take effect.

Managing Connectivity

  • Go to the Apple Menu  > System Preferences > Network
  • Select Novatel Wireless device on the left 
  • Then choose either Connect or Disconnect

 or 

 Uninstalling the Novatel Wireless Modem Software

To remove Novatel Wireless Modem files from your machine, delete the following files (requires Administrator permissions):

/System/Library/Extensions/NovatelWireless3G.kext
/System/Library/Extensions/NovatelWirelessFilter.kext